Once the furnace lining cools down to 400 ℃ , the furnace is turned over 90° C, the oil cylinder is lifted with a crane, the oil cylinder is connected to the furnace bottom, the hydraulic pump station is started, and the furnace lining is pushed out.
A set of lining push-out mechanism consists of the following parts
1. Launch the cylinder
2. Hydraulic valve and connecting pipe
3. Furnace bottom joints that match the system
4. System operation
Once the furnace lining cools down to 400 ℃ , the furnace is turned over 90° C, the oil cylinder is lifted with a crane, the oil cylinder is connected to the furnace bottom, the hydraulic pump station is started, and the furnace lining is pushed out.
| Description | Rating |
|---|---|
| Rated Power (KW) | 800 |
| Total Input KVA | 800 |
| Input Power Factor | 0.95 |
| Input Voltage (Volts) | 400 |
| Output Frequency (Hz) | 800 |
| Output Voltage (Volts) | 800 |
| Melting Temperature (°C) | 1550 |
| Nominal Capacity of furnace in Kg for Steel(kg) | 1000 |
| Melting Rate for Steel at 1550° C at 3500KW (Kg/Hr) | 1000 |
| Lining material | Acid or alkaline material |
| Multi-protections: overcurrent, overpressure or underpressure, water pressure, phase loss, furnace leak alarm and water temperature alarm | Yes |
MOBILE / WHATSAPP+86 0536-3421260
ADDRESSShanwang Town, Linqu County, Weifang, Shandong, China
Copyright © 2024 by Shandong Runhai Machinery Technology Co., Ltd. All Rights Reserved Designed by HUISHANG MEDIA
